Kindly quote: A closed gauging and sampling system to be fitted to each tank consisting of a portable closed gas-tight ullage temperature interface detector. Number of tanks: 12. Type of ship: Product and chemical tanker.
I need a level transmitter (4-20mA) to be used on a propane tank with specific density of 0.5 and operating pressure of 10 bars and opeating temperature range 18-28 degrees Celcius with a total length of 2.5m. I will be puchasing one level transmitter as soon as possible as a sample. I need a contact person to talk to.
ENQUIRY FOR SILICON CARBIDE SEAL RING: we require the following products:
1. Reaction Bonded Fine – Grand Silicon Carbide. R-SIC
2. Self-Sintered Silicon Carbide. S- SIC
Also let us know the following details:
1. Chemical Composition
2. Characters of the material
3. Strength of the material
4. Properties of the material
I urgently need a quote for a compressor, which will meet the following specifications. The compressor is part of a test loop which will be exposed to different gas flows depending on the test conditions.
Maximum flow rate: 2500 SCF/min
Maximum pressure: 1500 psia
Suction pressure: 22 to 1392 psi
Maximum pressure increase created by compressor: 140 psia
Delivery pressure: 40 to 140 psi greater than the suction pressure
Material: Hastelloy (C-276)
Maximum H2S concentration: 10%
Maximum CO2 concentration: 80%
Maximum H2O concentration: 2%
Maximum CH4 concentration: 100%
Maximum temperature: 150C
We request you to send us your competitive quote for 400 mts/ year of cationic polyelectrolytes (******* clear ML - 5924). Kindly send us your offer and specifications at the earliest.
I am looking for a variable flow rate pumping system. Preferably a stepper or dc motor control to pump from 1- 5 gallons per hour fluid transfer rate at 0- 5 psi. I will be pumping mineral oils. I will require several hundred of these units.
Hello, my company is interested in technology that will separate solids from our wastewater. We are a PVC business that removes resin and river water sludge from two different tanks. We are interested in a centrifuge that can handle both of these materials. Could you e-mail us any information you can offer, also we would be very interested in a trial of any equipment you might suggest.
Quote:
Cyanide monitor/analyzer for continuous testing of industrial (metal plating) effluent waters with cyanide in the 0.1 to 1.5 PPM range.
Chlorine monitor/analyzer for continuous testing of industrial (metal plating) cyanide destruct process with chlorine in the 5 to 250 PPM range.
We need about 33 m3 of activated carbn for a refinery unit in India. Application is for filtration of solvent (40% MDEA Methyl Diethanolamine). Bulk density 521 kg/m3, carbon size 8 x 30 mesh.
Please provide us a budgetary quote.
We are looking for gas sampling filters in the flat disk form, 25 or 47mm OD. A silver material would be the preferred type but we may be able to use other types. The 0.5 micron range is where we are starting.
We are interested to obtain a short path molecular still for enriching crude mixed TOCOS after removal of all triglycerides and sterols.
Flow rate of input is 20l/hr
Vac 0.001 torr
MOC is ss316
Skid mounted unit preferred fully piped and instrumented
